FYREBX FAQs

Yes, it has multiple internal baffles to control liquid movement.

It uses standard flow hydraulics.

850 lbs (386 kg) empty and 3,400 lbs (1,542 kg) full of water.

No. Its patented design distributes one-third of the weight behind the mounting plate for stability.

⚠️ Do not raise the boom on steep or uneven terrain.

Yes! It’s versatile for agriculture, construction, mining, industrial use, spraying weeds, fertilizers, dust control, and fire prevention.

Yes. You can batch mix foam agents and use either an air-aspirated nozzle or the compressed air foam system (CAFS).

It uses 10-gauge, 12-gauge, and ¼″ (6.35 mm) steel with reinforced areas.

Between 5–250 GPM (19–946 LPM) depending on setup.

  • ¾″ hose at 9 GPM = ~30+ minutes
  • 1.5″ fan nozzle = ~8 minutes
  • Max output = 300 gallons in ~1 minute

No. Drafting is used to fill other equipment (e.g., trucks, other FYREBX units).

Yes. An auxiliary hydraulic pump with 50′ hose is available for this.

Yes. It is universally compatible with all track loaders.

Yes, custom colors are available for an additional fee.

About 45 seconds to remove the current attachment and another 45 seconds to attach FYREBX using a quick coupler.

For mounting toolboxes, storage racks, potable water containers, or other accessories.

Yes, but only on flat terrain.

Raising the boom on uneven ground may cause a rollover.

Yes. You can switch between a wide mist and a tight stream.

Cant find an answer? ask us

Never share sensitive information (credit card numbers, social security numbers, passwords) through this form.

This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.